yego.me
💡 Stop wasting time. Read Youtube instead of watch. Download Chrome Extension

The fastest drummer in the world is a cyborg | Big Think x Freethink


3m read
·Nov 3, 2024

Processing might take a few minutes. Refresh later.

NARRATOR: This is the world's first bionic drummer. He's the fastest drummer in the world. He's also a pioneer of prosthetics. He's trying to control these robotic fingers with his mind.

JASON BARNES: Come on, dude. (beep) you.

ZACH: You're not doing that. I am.

BARNES: Come on, Zach.

ZACH: I'm working on it, man.

BARNES: What's going on, dude?

ZACH: I'm working on it.

NARRATOR: That dude helping is Zach, a grad student at Georgia Tech.

BARNES: It's working now.

NARRATOR: The goal of all this? To close the gap between man and machine. That is pretty cool.

NARRATOR: For Jason Barnes, music is life.

BARNES: What music does for me, I guess, is what drugs do for the everyday person. It's kind of an escape and a release for me. I've been a musician from a young age. I grew up watching my dad play guitar. Ever since then, drums have been my passion. Unfortunately, when I was 22, I was involved in an electrical accident at work.

NARRATOR: A transformer exploded and shocked him with 22,000 volts of electricity, burning him badly. He and his doctors made the tough decision to amputate his arm.

BARNES: I felt at the time that I had lost everything I have, as far as being a musician goes. It's completely devastating, especially when that is your whole life and it's taken from you. Something like that could potentially be the end of your world.

NARRATOR: But in a way, Jason was just getting started.

BARNES: I drug my drum kit out of the garage and taped the drum stick to my stump. Still had bandages on it and everything, and proceeded to start playing the drums. That moment right there was a push point for me to accept what had happened and try and do something with it.

NARRATOR: He was on his way to becoming a bionic musician, so the next thing Jason did was build a custom prosthetic to play the drums. And they worked pretty well, but then he found out about this. This robot musician is actually improvising. It's listening and responding in real time, just like a human.

GIL WEINBERG: I've always been excited about creating something new, that will inspire and surprise me.

NARRATOR: That's the robot's creator, Gil Weinberg.

WEINBERG: I'm trying to create robots that will actually make you cry, that will blow your mind, send shivers down your spine.

NARRATOR: Gil heard about Jason.

WEINBERG: I received an email from someone who said, "I know an amputee drummer, and he needs to have a robotic arm to play music." I immediately was interested.

NARRATOR: And Gil and Jason teamed up.

WEINBERG: I'm very excited about the idea of human augmentation, about bringing the technology into the body and allow people to explore things that they couldn't before.

NARRATOR: Gil equipped Jason with this robot arm, and he pre-programmed some dope beats on it. That allowed Jason to do this. And just to be clear, this is not humanly possible. He's doing 40 hits per second. That's twice as much with one arm as any human could do with two. But the real challenge was how to get Jason to fully control a robot arm like this with his mind.

First, they used a technology called EMG.

WEINBERG: EMG stands for electromyography.

NARRATOR: EMG reads electrical signals from the muscles in Jason's arm. Those signals start in his brain. This allows him to do some basic movements just by thinking about it.

BARNES: That was a game changer. I mean, we had no idea it was going to work as well as it did the first time I put it on. It was mind-blowing.

NARRATOR: But to give Jason even more control, they'd need a stronger and clearer signal from the muscles in his arm, so they're trying something new.

ZACH: This is where all the ultrasound research and magic happens.

NARRATOR: They're using ultrasound technology to help sensors see the signals Jason is sending much more clearly. Again, first from his brain, then to his muscles, then to the robot arm. If it works, he'll be able to control five different robot fingers with his mind, just as if it were his hand.

ZACH: Bah, bah-

BARNES: That's the ring finger-

ZACH:... and then it goes open.

BARNES: That's the thumb?

ZACH: Thumb,...

More Articles

View All
The Jet Business Bloomberg Editorial October 2013
People drive by; they see this Airbus corporate jet in the window. They catch their attention, and they come in to see what this place is. It is the most global market of any industry. Africa is a big market. Asia is a big market. London was a location wh…
Example: Comparing distributions | AP Statistics | Khan Academy
What we’re going to do in this video is start to compare distributions. So for example, here we have two distributions that show the various temperatures different cities get during the month of January. This is the distribution for Portland; for example,…
Restoring Flows to Depleted Ecosystems | Breakthrough
My work is really around a campaign called “Changed the Course,” which is about getting the public engaged in freshwater conservation and beginning to figure out how we can restore flows of water to depleted rivers, wetlands, and freshwater ecosystems. We…
Smokehouse - Thaw Project | Life Below Zero
I’m gonna build the smokehouse. So starting there, I’m gonna have to go find some nice post and get the bark peeled off of them and some poles. Start getting all my material, so I’m gonna head downriver and look for a really good spot to cut post and pole…
Solving exponential equations using exponent properties (advanced) | High School Math | Khan Academy
So let’s get even more practice solving some exponential equations. I have two different exponential equations here, and like always, pause the video and see if you can solve for x in both of them. All right, let’s tackle this one in purple first. You mi…
Mesh current method (step 4 solve)
We’re working on the mesh current method of analyzing circuits, and in the previous video, we set up our circuit. We set up our mesh currents flowing around these loops within the circuit, and we solved for the easy currents. That was the, uh, the current…